Test 1
Product Description
Epidemic prevention and disinfection channel (necessary for epidemic prevention)
Light and removable, made entirely of stainless steel, it can be disinfected with zero contact!
★ Intelligent operation★ Ultraviolet sterilization★ Automatic timing system★ Automatic body temperature recognition★ Automatic spray sterilization
RA-600 multi-purpose resin is a pure acrylic resin. It is specially produced by polymerization to strengthen Portland cement. It has become a universal cement additive resin worldwide. Because the RA-600 resin is filled between the cement molecules, the cement molecules are The molecules of RA-600 are bonded between the sand aggregate particles, which can enhance the original pressure resistance, wear resistance and impact stress. It also improves dense bonding and excellent weather resistance, which can prevent poor bonding of mortar.
- Adding RA-600 to cement or mortar can greatly improve the adhesion, waterproofness, wear resistance, weather resistance and salt damage resistance of the mortar.
- Adding RA-600 can strengthen the crack resistance and corrosion resistance of cement products.
- Improve cement adhesion
- Add 2% to about 0.5kg of cement paste or cement slurry and tile adhesive.
- This product is diluted 4 to 5 times with water and mixed with a 25kg pack of adhesive to double the adhesion.
- This product is diluted 4 to 5 times with water and mixed with caulking agent to inhibit white bloom.
- Improve the adhesion and wear resistance of mortar
- Adding 2~5% to cement mortar (1.0~2.5kg for 50kg of cement) can improve the long-term mortar adhesion and wear resistance after use.
- Use penetrating primer (primer for water-based paint)
- Dilute it 10 times with water and use it on the RC surface to produce high permeability. The pores on the cement surface of the slurry are closed and have good adhesion ability.
- concrete curing agent
- Add 10 times of water and apply to the concrete floor (the next day after grouting), spread evenly and apply once. It has the effect of moisturizing, resisting cracks and improving waterproofing.
- Mortar waterproofing reinforcement
- Add 10 times of water and spray it into the exterior wall mortar twice to resist whitening, water penetration, improve adhesion and weather resistance for a long time.
| Sample name | General adhesive | tile adhesive | RA600 sticky + tile adhesive |
| 7-day adhesive strength (kgf/cm 2 ) | 10.5 | 14.4 | 21.5 |
- This product is imported from Taiwan with raw materials and is packaged into 1kg and 10kg products.
- This product can be stored in a cool and ventilated place for 2 years.
| Appearance | Milky emulsion |
| Solids,by mass,% | 48.0±1% |
| Density@25°C,kg/litre | 1.05 |
| Glass transition temperature (Tg),DSC(onset),°C: | 5.5 |
| Minimum film formation Temperature,°C | 12 |
| pH | 9.0 |
| Viscosity,cps | 1000 |
Product packaging: 1kg, 10kg
★Add 250g~500g RA600 stock solution to 25kg adhesive ★Add 1.0~2.5kg RA600 stock solution to 50kg cement
★Use of penetrating primer: 10 times water for fine surfaces, 5 times water for rough surfaces ★The cement mortar is mixed with 2~5% of cement, 50kg/pack plus 1.0~2.5kg of RA600 stock solution
(Usually, the original solution can be diluted 10 times with water for use)
16. Hot spring pool waterproofing method
| project | illustrate | Suggested products |
|---|---|---|
| Base surface requirements | (1) The mortar base construction surface must be smooth, without holes and protrusions, and must have a drainage slope. (2) There should be no mud or laitance on the corners of the walls and on the floor. If there are unevenness in the inner corners, they will be smoothed by the mud contractor. | |
| Reinforcement part | (1) Right-angled corners must be rounded before applying waterproof coating. (2) Use PU caulking glue to close the edge of the pipe. | PU caulking glue Early strength structural repair materials |
| Material usage | (1) Coat a total of 3.0kg/m 2 of NB1 crystalline waterproof powder (applied in two applications). (2) Composite acrylic waterproofing material can be applied again with a coating of 1.0kg/m 2 | NB1 crystal waterproof powder Penetrating primer: DR-66, RA-600 Penetrating primer resin Composite acrylic waterproof material: RA-900, DP-02 Acrylic composite waterproof material |
| Construction process | (1) After wetting, apply NB1 crystalline waterproof powder once, wait 4 hours later when it is slightly dry, then spray it wet and apply the second coat of NB1 crystalline waterproof powder + resin. (2) NB1 crystalline waterproof powder is applied twice at 1.5kg/m 2 for a total of 3.0kg/m 2 . (3) An additional layer of composite acrylic waterproofing material can be applied with a coating of 1.0kg/m 2 to enhance elasticity and resist slight displacement. | |
| Inspection Method | (1) After completing 72 hours of curing, the water can be tested. (2) The duration of water testing only needs to exceed 72 hours. | |
| Remark | (1) After completion, it needs to be protected with mortar or covered with tiles to maintain the integrity of the waterproof membrane. (2) If the waterproof surface is damaged or damaged, it must be repaired and reinforced. | |
- Adding RA-600 to cement or mortar can greatly improve the adhesion, waterproofness, wear resistance, weather resistance and salt damage resistance of the mortar.
- Adding RA-600 can strengthen the crack resistance and corrosion resistance of cement products.
- Improve cement adhesion
- Add 2% to about 0.5kg of cement paste or cement slurry and tile adhesive.
- This product is diluted 4 to 5 times with water and mixed with a 25kg pack of adhesive to double the adhesion.
- This product is diluted 4 to 5 times with water and mixed with caulking agent to inhibit white bloom.
- Improve the adhesion and wear resistance of mortar
- Adding 2~5% to cement mortar (1.0~2.5kg for 50kg of cement) can improve the long-term mortar adhesion and wear resistance after use.
- Use penetrating primer (primer for water-based paint)
- Dilute it 10 times with water and use it on the RC surface to produce high permeability. The pores on the cement surface of the slurry are closed and have good adhesion ability.
- concrete curing agent
- Add 10 times of water and apply to the concrete floor (the next day after grouting), spread evenly and apply once. It has the effect of moisturizing, resisting cracks and improving waterproofing.
- Mortar waterproofing reinforcement
- Add 10 times of water and spray it into the exterior wall mortar twice to resist whitening, water penetration, improve adhesion and weather resistance for a long time.
| Sample name | General adhesive | tile adhesive | RA600 sticky + tile adhesive |
| 7-day adhesive strength (kgf/cm 2 ) | 10.5 | 14.4 | 21.5 |
- This product is imported from Taiwan with raw materials and is packaged into 1kg and 10kg products.
- This product can be stored in a cool and ventilated place for 2 years.
| Appearance | Milky emulsion |
| Solids,by mass,% | 48.0±1% |
| Density@25°C,kg/litre | 1.05 |
| Glass transition temperature (Tg),DSC(onset),°C： | 5.5 |
| Minimum film formation Temperature,°C | 12 |
| pH | 9.0 |
| Viscosity,cps | 1000 |
Product packaging: 1kg, 10kg
★Add 250g~500g RA600 stock solution to 25kg adhesive ★Add 1.0~2.5kg RA600 stock solution to 50kg cement
★Use of penetrating primer: 10 times water for fine surfaces, 5 times water for rough surfaces ★The cement mortar is mixed with 2~5% of cement, 50kg/pack plus 1.0~2.5kg of RA600 stock solution
(Usually, the original solution can be diluted 10 times with water for use)
- PU foaming anti-leak agent utilizes the foaming and expansion of NCO when exposed to water (moisture) and its special water absorption principle. It is poured into building cracks using high and low pressure infusion machines to achieve the function of rapid foaming, water absorption, water stopping and reinforcement. It has excellent penetrating power and can penetrate and fill gaps even finer than hair. According to experiments, the penetration and filling ability can reach micro gaps of 0.02mm, so it can completely seal all waterways in leaking cracks.
- Special for water-stopping and caulking of structural cracks
- 18kg/barrel (net weight)
| hydrophilicity | K35 |
| main ingredient | Reactive-NCO functional isocyanate polymers |
| Exterior | Light yellow transparent liquid |
| Viscosity cps/25°C | 250 and above |
| proportion | 1.06±0.1 |
| Contractibility | 0% |
| NCO% | 7±0.5 |
| Solid content% | 85 and above |
| Product shelf life (months) | 6 |
| Hydrophobicity | K100 |
| main ingredient | Reactive-CNC functional isocyanate polymers |
| Exterior | brown transparent liquid |
| Viscosity cps/25°C | 500±200 |
| proportion | 1.14±0.02 |
| Contractibility | 0% |
| NCO% | >100 |
| Solid content% | 85 and above |
| Product shelf life (months) | 6 |
| Product name | Water stop needle | butter head | |||
| model | A-8 | A-10 | B-8 | B-10 | High density |
| Specifications (DXL) | 13mmX8cm | 13mmX10cm | 9.5mmX8cm | 9.5mmX10cm | |
RA-600 multi-purpose resin is a pure acrylic resin. It is specially produced by polymerization to strengthen Portland cement. It has become a universal cement additive resin worldwide. Because the RA-600 resin is filled between the cement molecules, the cement molecules are The molecules of RA-600 are bonded between the sand aggregate particles, which can enhance the original pressure resistance, wear resistance and impact stress. It also improves dense bonding and excellent weather resistance, which can prevent poor bonding of mortar.
- Adding RA-600 to cement or mortar can greatly improve the adhesion, waterproofness, wear resistance, weather resistance and salt damage resistance of the mortar.
- Adding RA-600 can strengthen the crack resistance and corrosion resistance of cement products.
- Improve cement adhesion
- Add 2% to about 0.5kg of cement paste or cement slurry and tile adhesive.
- This product is diluted 4 to 5 times with water and mixed with a 25kg pack of adhesive to double the adhesion.
- This product is diluted 4 to 5 times with water and mixed with caulking agent to inhibit white bloom.
- Improve the adhesion and wear resistance of mortar
- Adding 2~5% to cement mortar (1.0~2.5kg for 50kg of cement) can improve the long-term mortar adhesion and wear resistance after use.
- Use penetrating primer (primer for water-based paint)
- Dilute it 10 times with water and use it on the RC surface to produce high permeability. The pores on the cement surface of the slurry are closed and have good adhesion ability.
- concrete curing agent
- Add 10 times of water and apply to the concrete floor (the next day after grouting), spread evenly and apply once. It has the effect of moisturizing, resisting cracks and improving waterproofing.
- Mortar waterproofing reinforcement
- Add 10 times of water and spray it into the exterior wall mortar twice to resist whitening, water penetration, improve adhesion and weather resistance for a long time.
| Sample name | General adhesive | tile adhesive | RA600 sticky + tile adhesive |
| 7-day adhesive strength (kgf/cm 2 ) | 10.5 | 14.4 | 21.5 |
- This product is imported from Taiwan with raw materials and is packaged into 1kg and 10kg products.
- This product can be stored in a cool and ventilated place for 2 years.
| Appearance | Milky emulsion |
| Solids,by mass,% | 48.0±1% |
| Density@25°C,kg/litre | 1.05 |
| Glass transition temperature (Tg),DSC(onset),°C: | 5.5 |
| Minimum film formation Temperature,°C | 12 |
| pH | 9.0 |
| Viscosity,cps | 1000 |
Product packaging: 1kg, 10kg
★Add 250g~500g RA600 stock solution to 25kg adhesive ★Add 1.0~2.5kg RA600 stock solution to 50kg cement
★Use of penetrating primer: 10 times water for fine surfaces, 5 times water for rough surfaces ★The cement mortar is mixed with 2~5% of cement, 50kg/pack plus 1.0~2.5kg of RA600 stock solution
(Usually, the original solution can be diluted 10 times with water for use)
RA-600 multi-purpose resin is a pure acrylic resin. It is specially produced by polymerization to strengthen Portland cement. It has become a universal cement additive resin worldwide. Because the RA-600 resin is filled between the cement molecules, the cement molecules are The molecules of RA-600 are bonded between the sand aggregate particles, which can enhance the original pressure resistance, wear resistance and impact stress. It also improves dense bonding and excellent weather resistance, which can prevent poor bonding of mortar.
- Adding RA-600 to cement or mortar can greatly improve the adhesion, waterproofness, wear resistance, weather resistance and salt damage resistance of the mortar.
- Adding RA-600 can strengthen the crack resistance and corrosion resistance of cement products.
- Improve cement adhesion
- Add 2% to about 0.5kg of cement paste or cement slurry and tile adhesive.
- This product is diluted 4 to 5 times with water and mixed with a 25kg pack of adhesive to double the adhesion.
- This product is diluted 4 to 5 times with water and mixed with caulking agent to inhibit white bloom.
- Improve the adhesion and wear resistance of mortar
- Adding 2~5% to cement mortar (1.0~2.5kg for 50kg of cement) can improve the long-term mortar adhesion and wear resistance after use.
- Use penetrating primer (primer for water-based paint)
- Dilute it 10 times with water and use it on the RC surface to produce high permeability. The pores on the cement surface of the slurry are closed and have good adhesion ability.
- concrete curing agent
- Add 10 times of water and apply to the concrete floor (the next day after grouting), spread evenly and apply once. It has the effect of moisturizing, resisting cracks and improving waterproofing.
- Mortar waterproofing reinforcement
- Add 10 times of water and spray it into the exterior wall mortar twice to resist whitening, water penetration, improve adhesion and weather resistance for a long time.
| Sample name | General adhesive | tile adhesive | RA600 sticky + tile adhesive |
| 7-day adhesive strength (kgf/cm 2 ) | 10.5 | 14.4 | 21.5 |
- This product is imported from Taiwan with raw materials and is packaged into 1kg and 10kg products.
- This product can be stored in a cool and ventilated place for 2 years.
| Appearance | Milky emulsion |
| Solids,by mass,% | 48.0±1% |
| Density@25°C,kg/litre | 1.05 |
| Glass transition temperature (Tg),DSC(onset),°C: | 5.5 |
| Minimum film formation Temperature,°C | 12 |
| pH | 9.0 |
| Viscosity,cps | 1000 |
Product packaging: 1kg, 10kg
★Add 250g~500g RA600 stock solution to 25kg adhesive ★Add 1.0~2.5kg RA600 stock solution to 50kg cement
★Use of penetrating primer: 10 times water for fine surfaces, 5 times water for rough surfaces ★The cement mortar is mixed with 2~5% of cement, 50kg/pack plus 1.0~2.5kg of RA600 stock solution
(Usually, the original solution can be diluted 10 times with water for use)